01.06.2024
Beginner-friendly robot automation
RoboJob Mill-Assist at the HEDELIUS technology centre
Discover our latest highlight at the HEDELIUS technology centre: the RoboJob Mill-Assist robot automation system. In conjunction with the ACURA 50 EL, this solution offers intuitive and efficient processing of small series and workpieces.
Find out more about the advantages of this automation system and how it can increase efficiency, capacity and flexibility.
We would also be happy to present this automation concept to you live.
We look forward to welcoming you to our HEDELIUS technology centre!
Technical highlights
Connected to the left-hand side of the machine, the Mill-Assist loads the machining centre through a loading opening. Thanks to the side loading, the work area remains fully available for set-up and control work, but also, for example, for single part production during the day shift. Even crane loading of the machine is possible without restrictions.
6-axis robot with 25 kg load capacity
The robot arm of the Mill-Assist has a maximum transfer weight of 25 kg. The double gripper, for gripping raw and finished parts, takes the parts from the grid support and places them in the clamping device on the work table of the ACURA 50 EL. The length of the workpieces must be between 20 and 250 mm.
Graphical user interface for easy retooling
The operating panel allows the user intuitive graphical operating even without robot knowledge. Other aspects such as the clear 3D visualisations in the software and a set-up time for new workpieces of around 5 minutes round off the user-friendly operating concept. The software can also be easily supplemented with user-defined, specific optional features.
Highest capacity in the smallest space
RoboJob's patented stacking principle offers maximum capacity in the smallest of spaces. Workpieces can be stacked at a height of up to 350 mm. Grid plates are not absolutely necessary, but can be integrated if the customer so wishes. Based on this principle, a wide range of Workpiece dimensions can be loaded by the Mill-Assist.
Maximum flexibility thanks to innovative gripping system
The flexibility of the gripping system allows the user to automate a wide range of workpieces. The infeed and outfeed of the workpieces can be individually configured. A compressed air nozzle integrated into the gripper also ensures that the clamping system is cleaned before each workpiece change. The concept is rounded off by a quick and uncomplicated process for changing the grippers.
User video
Watch the video below for a brief insight into the user-friendly operating of the RoboJob Mill Assist. The changeover process on the ACURA 50, from single parts to series production, takes place in just a few simple handles.
This video requires your consent to third-party cookies. Privacy settings
Further informationGallery
Arrange a demonstration appointment
Experience live
See the performance of the combination of ACURA 50 EL and RoboJob Mill-Assist for yourself and arrange a personal demonstration appointment now. You can also discover many other CNC machining centres and automation solutions that our technology centre has to offer. We look forward to seeing you here in Meppen!
More news
In modern CNC production, no two jobs are the same: Today prismatic 3-axis machining, tomorrow complex 5-axis components and then the machining of shafts, tubes or mouldings. With the FORTE 65 with rotating/swivelling table, HEDELIUS offers a machining centre that adapts quickly and efficiently to changing requirements for maximum productivity and safety.
The GEWO Feinmechanik GmbH & Co. KG relies on the 3-axis machining centre FORTE 85 Single 1620 from HEDELIUS for the production of high-precision components. The decisive factors for the investment were the high machine stability, the large Y travel path and the compact design of the CNC milling machine. In daily use, the FORTE 85 impresses with its precise machining results, high level of user-friendliness and economical production, even with difficult-to-machine materials. GEWO also reports productivity increases of 15 to 20 per cent and emphasises the partnership-based cooperation with HEDELIUS.
With the TILTENTA MILLTURN, HEDELIUS is opening a milling and turning machining centre on the market for the first time that combines both machining steps in one machine, thus enabling a continuous manufacturing process. Instead of having to reclamp workpieces several times or switch between different machines, the entire machining process takes place in one stable clamping, which simplifies processes and reduces sources of error. Find out how the concept works in detail, what possibilities arise in practice and for which applications the MILLTURN is particularly suitable.
